Ezwebgroup's Link Exchange DirectoryYou are here » Ezwebgroup's Link Exchange » Links Directory » Games » Video Games (0)
Video Games RSS Feedsstream xvid to xbox360 - I'm trying to stream an xvid video to xbox360, but it fails. I googled some and came up with that the proble is either that it is AC3 or the bit rate is too high. Is that correct? What tool can I use to check the bit rate and if it's AC3? I'm trying to stream from miniDLNA server, if that ...Feed Source: forum.videohelp.com AVI Videos Cutting Out - *I burn all my movies as data discs in avi format on dvd-r's. my dvd player plays these videos just fine. but from time to time a file won't play properly. some won't play at all whilst others will cut out at the beginning, middle or end. and some videos that usually play normally will cut out part ... Advice needed on best conversion to MPEG-2 - I have some video clips I downloaded that all look similar in MediaInfo (http://www.videohelp.com/tools/MediaInfo) as pasted below. Despite the low bit rate, the quality is not as bad as you may think -- see screen shot below the MediaInfo data. My question is about what bit rate I should use to ... Why is my audio saying mono after its muxed? - I encoded my audio from AC3 in Megui (http://www.videohelp.com/tools/MeGUI) to AAC
Mine say AAC 24000Hz Stereo 768kbps [Audio] in Media Player Classic (http://www.videohelp.com/tools/Media-Player-Classic) for my audio files before their muxed into MKV.
It doesnt say AAC 48000Hz mono [Audio] ... Lame MP3 on Virtualdub 64bit (win7 64bit) - is there a way to use the lame MP3 (http://www.videohelp.com/tools/Lame-MP3) with virtualdub (http://www.videohelp.com/tools/Virtualdub) 64bit?
i try to do this:
---Quote---
1. Extract it to for example c:\lame
2. Run cmd with admin rights (ctrl+shift+return)... Avisynth MPEG2Source - Hi Folks,
I am trying to use avisynth (http://www.videohelp.com/tools/Avisynth) filters for different tasks. Avisynth has a function called AVISource where one can define the input and output files. Most of my video clips are in MPEG2 format. I saw that avisynth supports a function called ... vod website - i am making a website that has tutorial videos and the project has limited funds.
the user will buy access to a cms page that has videos on it.
this is not live streaming
this is VOD
i would like to have a player where the user can switch (like youtube ):... vod website - i am making a website that has tutorial videos and the project has limited funds.
the user will buy access to a cms page that has videos on it.
this is not live streaming
this is VOD
i would like to have a player where the user can switch (like youtube ):... FFmpeg Command Lines for Converting Video to Various Devices?? - Does anybody maintain a list of FFmpeg (http://www.videohelp.com/tools/ffmpeg) command lines for converting audio and video files to various devices (e.g. iPhone, PSP, Android, etc.) ??
Thanks!!
:cool:... mkv conversion to dvd sync error - i have an .mkv file that consists of h264, and ac3 audio. standard isnt it? well, i want to get it to an avi container, so i can run it though nero (http://www.videohelp.com/tools/Nero) vision to get it to dvd. seems the easiest high quality method for me.
i am having a problem with sync ... Avisynth: PNG sequences on MP4 video - Good day to everyone.
I didn't find another topics about my request because i think it isn't common.
I'm using Xvid4Psp (http://www.videohelp.com/tools/XviD4PSP) 5 (last version for 5) to hardsub a mp4 video with ass subtitle. I want to add something better to replicate a blue fire on a logo.
My ... Ripbot264 audio options - I am converting lots of DVDs i own to MP4 as they will be roughly 2 - 4gb each in size.
My concern is that with Ripbot (http://www.videohelp.com/tools/RipBot264) the only audio options i have are AAC. There doesnt seem to be an option to copyaudio! Or is there?
With ripbot converting ... Odd Recording Volume Problem - I'm trying to record my old LPs to my computer using a phono box into the line in. Am using Windows 7 and Sound Forge (http://www.videohelp.com/tools/Sound-Forge) 4.0 (yeah old but it works).
The odd thing that's happening is this - when I turn down the volume on my speakers (so that I can ... Capturing BetacamSP, S-VHS and U-matic using Terratec G3 - I have been assigned the task at my work to convert a couple hundred of video tapes in the formats BetacamSP, VHS, S-VHS and U-matic.
Although I have never done this before, I do not think that it will be any problem so get the video digitalized, the problem lies in making the videos be of such a ... maybe someone can help me please? - hello
i did a format to my camcorder hdr sr-12 by a mistake and i wanted to know how can i use the camcorder again, i do not need any data recovery just want to film again.
when i press record it says "hdd format error"
i tried to do format in a different way and nothing changed
what do i need ... Not Equipped to handle adventure - In early roleplaying games equipment was king. We deliberated over who could carry the gear we needed. Pots, pans, tents, and bedrolls were packed carefully onto our character sheets. Iron rations were bought and consumed -- suppplemented with fresh food when the prospect arose. Our dreams weren't preoccupied with magic items -- a suit of plate armor was a treasure worth countless toil and adventure. Like kids at the pet store we did as much... Sustained Storylines ~ Casting The Net - The term "plot hook" can actually be more diminishing to your campaign than supportive. It immediately and clearly defines a few points at which the PCs can engage with the setting and the loose storyline you have in mind for the campaign. It limits the points of engagement to those few you planned out and sets you up to have to "wing it" far more than you have to if you're the type to give the PCs the freedom to go "off the map" as it were. S... Sustained Storylines ~ Establishing Buy In First - In a world of short attention spans and the media that caters to them it can be challenging for a gamemaster to establish long term buy in from their players. It's easy to blame this on the players but as in all things the problem, and therefore the solution, often lies closer to home than many are willing to admit. Using the simple writing techniques of series writers from the world of fiction and understanding a bit about the psychology of yo... Rules for Social Interaction - Role-playing games use dice to resolve events and simulate results that are out of the control of the intentions of the character. When a character wants to say something, they can; when they want to pick up a stone and hurl it, they can. What they cannot control is whether the stone hits what they want -- or whether the words have the impact that they want. It the RPG world that is resolved by the dice.
read more... To Play or Not to Play: The Song of Ice and Fire RPG - Unless you have lived in a cave somewhere for the past couple of years or rabidly avoid the Fantasy genre entirely, you have heard about George RR Martin's Song of Ice and Fire fantasy series published by Bantam Books. The novels regularly reside at #1 for Sci Fi/Fantasy when they debuted in the in the early '90's and the more recent books have made the top ten bestselling lists worldwide, despite being rather dark, adult oriented and dangerous t... Burning Wheel - The Burning Wheel RPG is not another d20 clone. It is a roleplaying game designed to appeal to the narrative gamer who doesn't want to get bogged down in mechanics. While the game shows a lot of promise, I remain unconvinced that it will work at the game table. The elements of shared storytelling are broken by a number of mechanics that seem added to give the player the extra mechanisms that they expect in a roleplaying game. Tactical combat,... Tales From the Trench - As long as we're all back here together, let's catch up on some of what makes our campaigns so great; those moments that can never be forgotten as long as we game. Recent is what I'm looking for? not pining for the days of our campaigns years ago.
read more... The End of my Tabletop Era - Today, I boxed up all my RPGs. They're still in plain sight, they're still loved and memories cherished, but the boxing, for me, means the end of my involvement with tabletop gaming. This has literally been a long-time coming: when I first started Gamegrene back in 2000, my orbit was already slowly decaying, and I hoped that dedicating a site to my love would keep things going.
read more... An Interview with Jay Little - Why a 3rd edition to WFRP? Why now? "Based on recent trends in the roleplaying market and numerous discussions between Games Workshop and Fantasy Flight Games, we determined the time was right to develop and introduce a new edition, attracting more fans to the Warhammer Fantasy setting made popular by Game Workshop's tabletop miniatures game." Read all about it in this interview with Jay Little, lead designer on Warhammer Fantasy Roleplay 3rd Edi... WOTC Annual Layoff Extravaganza - No surprise to anyone by now: Wizards of the Coast has started another round of Christmas layoffs. This year, so far, Rob Heinsoo (D&D 4e Lead Designer), Logan Bonner (Adventurer's Vault), Chris Sims (4e Monster Manual and Dungeon Master's Guide) and Stephen Radney-McFarland have been cut.
read more... Copyright © 2012, Ezwebgroup's Link Exchange. All Rights Reserved. |